HIGH PERFORMANCE COMPACT LINE ARRAY SYSTEM
LA206A built-in efficient CLASS D power amplifier 300W(LF)+150W(HF), built-in high-performance DSP and advanced RS485 integrated control, with Crossover, PEQ
adjustment, LIMITER, PHASE and other functions, to provide accurate control of the signal while ensuring large dynamic output without distortion, built-in a variety of
preset modes, The corresponding mode can be selected according to the different use combinations of the speaker, and the system can be adjusted to the most
suitable state;Suitable for outdoor mobile performance, sports sound hall, multi-function hall, church, theater and other large occasions。
Lightweight design, reduce system weight, easy to install
With high-strength ABS box design, The magnetic circuit of the 6.5" horn unit is designed with neodymium iron, total weight of the system is greatly reduced
compared with the traditional linear array speaker with the same sound pressure level while maintaining high performance.
[Back]
Professional speaker management system is very convenient to match
the LA206A line array system, integrated RS485 interface, convenient
tuner according to different collocation and different scenes to tune
Multiple modes are preset for different scenarios, such as HFC1 and HFC2
functions to compensate for high frequency energy attenuation due to air
absorption when the speaker is used to cover far-field listening positions
Through the software, the speakers can be set into groups. For example, the
top two are set into a group for HFC1 mode to compensate the high pitch,
and the bottom two are set into a group for Frontfill mode to near-field
mode.
Software operation is simple and easy to use, only need to connect the
computer to the RS485 network port can be connected to the control.
MODEL | LA206A | LA115A-SUB |
---|---|---|
Type | Dual6.5" Line Array Module | 15" Line Array Module |
Power Rating(RMS) | 300W(LF)+150W(HF) | 1000W |
Power Rating (PEAKE) | 600W(LF)+300W(HF) | 2000W |
Frequency Range (array) | 100Hz - 20KHz | - |
Frequency Range (SUB) | - | 45Hz - 150Hz |
Coverage Patem(HxV) | 100x15° | - |
Max SPL | 123dB | 129dB |
LF Driver | 2x6.5"Woofers2"VC, Neodymium | 15" Woofer,4"VC |
HF Driver | 1.75"Titanium | - |
Ammlifidr type | Class-D With DSP RS485 | Class-D With DSP RS485 |
Input Connectors | XLR 20KΩ Balanced | XLR 20KΩ Balanced |
Ouput Connectors | XLR Balanced | XLR Balanced |
Function | DSP setup Low out RS485 Network | DSP setup Low pass RS485 Network |
Power Votage | 100-240VAC50/60Hz | 100-240V AC50/60Hz |
DSP | 96KHz Sampling frequency 24Bit | 96KHz Sampling frequency 24Bit |
Enclosure | ABS | 18mm Plywood |
THD | <= 0.1% | <= 0.1% |
Protection | Short Circuit,Over-Current,limiter,DC,Over temp,Soft start | Short Circuit,Over-Current,limiter,DC,Over temp,Soft start |
Dimension | 500x435x535mm (1 in 2) | 565X795X545mm |
Weight | 12.5kg | 40.7kg |